.png){kind=logo}
Someone in your building group quoted ₹2.5 lakh for a kitchen. Someone else quoted ₹5 lakh, and both mentioned Hettich. That gap isn’t a pricing mistake, it’s two different kitchens wearing the same hardware name.
Hettich doesn’t sell a kitchen. It sells the hinges, drawer channels, lift systems and wire baskets that go inside one. The carcass, shutters, counter top and labour are priced separately. If you’re budgeting for the whole flat rather than just the kitchen, our 3BHK interior design cost in Bangalore guide is a good place to start. Here, before comparing two “Hettich kitchen” quotes, it helps to know which part of the bill Hettich is actually responsible for.
Quick Answer: Cost by Layout
Layout | Typical carcase area | Indicative total with Hettich hardware |
Straight/single-wall | 35–50 sq ft | ₹1.3–2.2 lakh |
Parallel/galley | 70–95 sq ft | ₹2.3–4.0 lakh |
L-shaped | 65–90 sq ft | ₹2.2–3.8 lakh |
U-shaped | 95–130 sq ft | ₹3.2–5.5 lakh |
With an island | 110–150 sq ft | ₹4.0–7.0 lakh+ |
These are market-level planning ranges, not a DezinePro quotation. Your figure moves with exact dimensions, shutter finish, counter top and how much Hettich hardware you choose over a basic alternative.
What Hettich Actually Prices
Hettich makes hinges, drawer slides, pull-out baskets and lift-up systems. It doesn’t make the carcass, shutters, counter top or backs plash, and it doesn’t set labour rates. A “Hettich kitchen” is really a regular modular kitchen (confirm live URL before publishing) with Hettich fittings instead of a generic alternative, so the base price still comes from carcase material, shutter finish and counter top. Hettich sits on top as a hardware upgrade.
Moves with Hettich hardware
Soft-close hinges and drawer channels
Wire baskets, pull-outs, corner mechanisms
Gas-assisted lift-ups for wall units
Stays the same either way
Carcase material and thickness
Shutter finish and counter top
Civil, electrical work and installation labour
Hettich vs Standard Hardware
Item | Standard | Hettich-grade | What you notice over time |
Hinges | Visible wear in 3-4 years | Soft-close, higher cycle rating | Doors stop sagging or slamming |
Drawer channels | Partial extension, can stick | Full extension, soft-close | Drawers open fully, close quietly |
Corner units | Fixed shelf, dead space | Pull-out carousel | Corner storage becomes usable |
None of this shows on day one. It shows in year three to five, which is when cheaper hardware starts to sag or stick. Worth the spend if you’re staying put. One of the easier places to save if you’re fitting out to sell or rent quickly.
How to Get an Accurate Quote
Confirm your layout first. The quote changes with it.
Ask for hardware listed item by item, not just “Hettich fittings” as one line.
Separate hardware cost from carcase and shutter cost so quotes can actually be compared.
Ask for the specific Hettich range or model, the way you’d ask for a plywood grade.
Get warranty terms in writing. They vary by product and vendor, so don’t assume.
Smart Ways to Manage the Budget
Upgrade hinges and drawer channels first. They move every day.
Go standard on units you rarely open, like a loft or spare corner cabinet.
Pick the layout before the hardware tier. A smaller layout with full Hettich hardware can cost about the same as a larger one with basic hardware.
Ask what “Hettich kitchen” means in each quote. The same brand name can cover disparate scopes.
If you’re renovating an older flat rather than fitting out a new one, our home renovation checklist for Bangalore (confirm published before linking) covers sequencing and contingency budgeting alongside the kitchen itself.
How DezinePro Prices This
We’ve worked in Bangalore since 2004. Every estimate agrees layout and budget first, then measures the space, then quotes, with carcase, shutters, counter top and hardware as separate lines, so you can see exactly what the Hettich fittings add.
Conclusion
There’s no single Hettich modular kitchen cost in Bangalore, because Hettich prices the hardware, not the kitchen. What you pay follows your layout, carcase and shutter choices, counter top, and how much of your hardware budget goes to Hettich fittings versus a basic alternative. Once those sit as separate lines on a quote, two numbers that looked impossible to compare start making sense.
Frequently Asked Questions
Typically ₹1,800–4,500 per sq ft of carcase area, roughly ₹1.3–2.2 lakh for a straight layout and ₹3.2–5.5 lakh or more for a U-shaped one. Exact cost depends on layout size, shutter material, counter top and which Hettich fittings you choose.
Both are established European brands at comparable quality tiers for soft-close hinges and drawer systems. The more useful comparison is the specific product range and price within each brand, since both span entry-level to premium.
L-shaped, usually. It uses less carcase and shutter area than a U-shaped kitchen in a similar room, and a U-shape adds a third run plus more corner hardware.
Terms are set by Hettich and your vendor together and vary by product. Ask your designer to confirm the period and coverage for each item in writing before signing off.
Depends on how long you’ll stay and how often you’ll use it. Hinges and drawer channels wear fastest with standard hardware, so upgrading those pays off if you’re staying put. Standard hardware on low-use units is a reasonable place to save otherwise.
About the Author
Akhilesh Vishwakarma, Founder, DezinePro Interiors, Bangalore. Akhilesh has worked on residential interior design and execution in Bangalore, including modular kitchens and renovation projects.
Reviewed by: DezinePro Design & Execution Team
Pricing note: All figures are indicative market planning ranges, not fixed DezinePro quotations. Final pricing depends on measurements, materials, hardware selection, site conditions and applicable taxes.
